Please note the Ausmotion mounts are made to order, allow 2-3 weeks for delivery.
Please check your vehicle year model is listed below before purchase.
The Behind Seat Battery Mount from AusMotion makes installing a Slimline Lithium Dingobox clean and simple. Installed in under 60 minutes their unique range of behind-seat battery mounts for late model vehicles provide a safe and secure method of mounting the battery. The vehicle also remains ADR compliant.
This product is made to order and may ship from the Perth Manufacturer if there is no stock at Dingobox on the Fraser coast.
Suitable for Isuzu DMax 4×4 Dual Cab (3rd generation “RD” October 2019 onward)
Suitable for Mazda BT50 4×4 Dual Cab (3rd generation “TF” June 2020 onward)
Suitable for NP300 Navara
Locally designed and manufactured in Australia by AusMotion.
Includes all mounting hardware, rated battery restraining straps, and detailed instructions.
We recommend combining this Behind Seat Battery Mount with our 25A Bundle (Value Pack).
Purchase price includes shipping from AusMotion in Perth. If you purchase a Dingobox and Battery Mount, they may arrive at different times.
For more details visit the AusMotion product page by clicking here.
Behind Seat Battery Mount | DMAX, BT50, NP300
This product has been designed to fit several different vehicles and the fitting kit includes all parts necessary for all. It is designed to fit the following vehicles:
Mazda BT50 and Isuzu DMax
- Mazda BT50 4×4 Dual Cab (3rd generation “TF” June 2020 onward)
- Isuzu DMax 4×4 Dual Cab (3rd generation “RD” October 2019 onward)
The installer must use a drill to increase the size of one hole in a bracket on the back wall of the cab (see photo). An M6 thread insert (supplied with the battery mount) must then be fitted to that hole using a simple, cost effective tool available from tool shops and large hardware stores. This product cannot be fitted without the supplied thread insert being added to the vehicle.
The plastic trim panel that is fitted to the back wall of the cab and the other down the side of the back wall will need to be trimmed a little during installation.
Nissan Navara
- NP300 Navara
Suitable for all NP300 Navara vehicles, including those with the electric rear sliding window. Vehicles without ISOFIX rear seat anchors require thread inserts (not included) to be fitted in the vehicle floor to secure the battery mount.
For vehicles with the electric sliding rear window, the actuator is relocated to above the battery. It’s proven to work well in this new location but the installer will need to extend the wiring to the actuator (a basic two wire cable).
Requires no drilling or cutting of metalwork to install this product in vehicles with ISOFIX rear seat anchors.
All Vehicles
This mount designed for direct mounting of the Baintech or Amptron batteries listed above.
Installation takes approximately one hour.
Includes pre-cut holes for Redarc BCDC charger, multiple midi fuse holders, Victron shunt and a circuit breaker.
Carpet on back wall of the cab must be removed to install this product. You may decide to trim the carpet panel and fit the remains on either side of the battery mount but most owners opt to leave the carpet panel out of the vehicle.
Using a battery larger than a Dingobox may cause the seat back to not fit.